4063
Publications
11304
Auteurs uniques
2
Pays représentés
Afrique du SudTogo
Sous-domaines
Génie biomédical
12 publication(s)
Génie chimique
6 publication(s)
Génie civil
16 publication(s)
Génie environnemental
1 publication(s)
Génie hydraulique
0 publication(s)
Génie industriel
9 publication(s)
Génie minier
0 publication(s)
Génie mécanique
2 publication(s)
Génie électrique et électronique
4 publication(s)
Génie énergétique
1 publication(s)
Mécatronique
0 publication(s)
Technologies émergentes
58 publication(s)
Télécommunications
0 publication(s)
Publications
4063 publication(s) trouvée(s)
Article scientifique
Retraction: Using artificial neural network for forward kinematic problem of under-constrained cable robots
Cable-Driven Parallel Robot has many advantages. However, the problems of cable collision between each other and environment, the lack of …
Article scientifique
WARM-START HEURISTICS FOR SOLVING THE PASSIVE OPTICAL NETWORK PLANNING PROBLEM
The use of automated network planning systems is crucial for reducing the deployment cost and planning time of passive optical …
Article scientifique
Correction to: How do the geological and geophysical signatures of permeable fractures in granitic basement evolve after long periods of natural circulation? Insights from the Rittershoffen geothermal wells (France)
After publication of the article (Glaas et al. 2018), it has been brought to our attention that there are some …
Article scientifique
Trellis Coded 4-ary PAM using Distance-Preserving Mapping
A trellis coded 4-ary Pulse Amplitude Modulation (4-PAM) is presented, where the encoding algorithm is derived from Distance Preserving Mapping …
Article scientifique
Damped Zero-Pseudorandom Noise OFDM Systems
This paper proposed a new OFDM scheme called damped zero-pseudorandom noise orthogonal frequency division multiplexing (DZPN-OFDM) scheme. In the proposed …
Article scientifique
4.5G Capacity & QoS Optimization: A New Proposal to Enhance the Principal KPIs of 5G/IoT
RF capacity management and optimization is an important part of the network performances of the future. � Technically, 4.5G/5G mobile …
Article scientifique
EVALUATING THE SUITABILITY OF ALUMIDE TOOLING FOR INJECTION MOULDING OF DIFFERENT POLYMERS
This paper describes the possibility of using laser-sintered Alumide as an alternative material for producing rapid tooling (RT) inserts. To …
Article scientifique
Experimental studies for bearings degradation monitoring at an early stage using analysis of variance
This work presents a procedure for bearing degradation monitoring at an early stage. The analysis of variance (ANOVA) coupled with …
Article scientifique
Cellulosic Cyperus esculentus L. as a filtrate loss modifier in field applicable aqueous and non-aqueous drilling fluids
The design and formulation of drilling fluids require additives that are cost-effective and environmental friendly in line with international best …
Article scientifique
Collaborating filtering using unsupervised learning for image reconstruction from missing data
In the image acquisition process, important information in an image can be lost due to noise, occlusion, or even faulty …
Article scientifique
Reservoir heterogeneity of Agbada Formation sandstone from PZ-2 well and PZ-4 well, Niger Delta: implications for reservoir management
Sandstones of the Agbada Formation deposited in Eocene serves as the main hydrocarbon reservoirs of the Niger Delta Basin. PZ-2 …
Article scientifique
Journal of Transport and Supply Chain Management – Editorial
The Journal of Transport and Supply Chain Management (JTSCM) seeks to disseminate research results and to support high level learning, …
Article scientifique
TENSILE AND HIGH CYCLE FATIGUE PROPERTIES OF ANNEALED TI6AL4V (ELI) SPECIMENS PRODUCED BY DIRECT METAL LASER SINTERING
The tensile and high cycle fatigue (HCF) properties of high temperature annealed (HTA) direct metal laser sintered (DMLS) Ti6Al4V extra …
Article scientifique
A three-dimensional model for thermionic emission from graphene and carbon nanotube
Graphene and carbon nanotube (CNT) have been proposed to be good materials for thermionic energy converter (TEC). For accurate simulation …
Article scientifique
Approaches to measuring resilience and their applicability to small retail business resilience
The resilience concept has attracted interest across many fields in the recent years. The interdisciplinary nature of the concept has …
Article scientifique
VARIATION OF IMPACT TOUGHNESS OF AS-BUILT DMLS TI6AL4V (ELI) SPECIMENS WITH TEMPERATURE
The response of direct metal laser sintering (DMLS) produced Ti6Al4V (ELI) to impact was investigated using an instrumented Charpy impact …
Rapport
Accès à l’Électricité au Sahel : Diagnostic et Opportunités
Article scientifique
Seismic interpretation and petrophysical analysis for hydrocarbon resource evaluation of ‘Pennay’ field, Niger Delta
Seismic interpretation and petrophysical assessment of borehole logs from seven wells were integrated with the aim of establishing the hydrocarbon …
Article scientifique
The characterization of flavored hookahs aroma profile and in response to heating as analyzed via headspace solid-phase microextraction (SPME) and chemometrics
Flavors profiling in flavored hookah tobacco is an issue of increasing scrutiny for the health sector owing to its adverse …
Article scientifique
LQR and PID Algorithms for Vibration Control of Piezoelectric Composite Plates
In this paper, a formulation of a sandwich plate integrating an elastic central layer (isotropic or composite) between two piezoelectric …