8 publication(s) trouvée(s)
Article scientifique
Effects of Particle Size Distribution on the Properties of Natural-Based Composite
In this study, locally sourced natural materials (coconut shells and seashells) were used separately to produce composites. The powders were …
Article scientifique
Hardness and Tensile Properties of Prophylactic Knee Brace Produced from Cow Bone and Periwinkle Shell Composites
Application of reinforced aluminium scrap for the production of prophylactic knee brace (Pkb) particularly with agro-waste materials is rarely available. …
Article scientifique
Inhibitive Potential of Prosopis Africana on Corrosion of Low Carbon Steel in 1M Hydrochloric Acid Medium
Recently, there is quest for the use of inexpensive, non-toxic, non-biodegradable, readily available and environmentally acceptable corrosion inhibitor. Studies have …
Article scientifique
Sustainable Machining Processes through Optimization of Process Parameters
Machining processes are a vital part of manufacturing activities in major industries that contributes to the growth of the economy. …
Article scientifique
Comparative Analysis of Machining Stainless Steel using Soluble and Vegetable Oils as Cutting Fluids
In this study, the performance of groundnut oil as an alternate cutting fluid was compared with that of soluble oil …
Article scientifique
Investigation of Drill Bit Temperature during Automatic Bone Drilling
Bone drilling operations are carried out in hospitals in different surgical operations worldwide (e.g. orthopedic surgeries and fixing bone breakages). …
Article scientifique
Effect of Coolant Temperature on Surface Finish during Turning of Titanium Alloy Ti6Al4V
High temperature generated and stresses induced as a result of turning of Ti6Al4V results in poor surface finish. The aim …
Article scientifique
Statistical Monitoring and Optimization of Electrochemical Machining using Shewhart Charts and Response Surface Methodology
The response surface methodology (RSM) and Shewhart control charts have been widely used in manufacturing to reduce variation, improve quality …