Accès ouvert

Bandwidth Enhancement of a Bell-shaped UWB Antenna for Indoor Localization Systems

Article scientifique 2021 Anglais

Résumé

In this paper, a simple method of enhancing the bandwidth of the Bell-shaped UWB Antenna for indoor localization systems is proposed. Therefore, a modified version of the bell-shaped Ultra-Wide Band (UWB) antenna for indoor localization systems is presented. The proposed antenna is printed on a low-cost FR-4 substrate of 21×27×1.6mm3 size. It is composed of a bell-shaped radiating patch and a multi-slotted ground plane. The measured results show that the proposed antenna has an impedance bandwidth of about 11.2GHz ranging from 3.16GHz to 14.36GHz at S11<−10dB. Compared to the original version, an enhancement of about 5.56GHz in the measured impedance bandwidth was observed.

Citer ce document

Karoui, M., Ghariani, N., Lahiani, M., Ghariani, H. (2021). Bandwidth Enhancement of a Bell-shaped UWB Antenna for Indoor Localization Systems. https://doi.org/10.48084/etasr.3975

Accès au document

Voir sur le dépôt source

Ce document est hébergé sur son dépôt institutionnel d'origine.

Auteur(s)

Mohamed Salah Karoui Nadia Ghariani Mongi Lahiani Hamadi Ghariani

Statistiques

Consultations : 1

Téléchargements : 0