Accès ouvert

Characteristics Study of Mild Steel Electro-plated with Light Weight Zn-Si3N4 Nanocomposite

Article scientifique 2022 Anglais

Résumé

Abstract In most industries, Lightweighting has become a popular concept. Production of low-density components is presently seen as a technique for achieving improved handling and efficiency in manufacturing industries. Thus, low-density Si3N4ceramic particles were introduced into the matrix of zinc to produce low-density Zn-Si3N4nanocomposite films. After preliminary experimental runs, Zn-Si3N4nanocomposite coated mild steel samples were produced at 0.3 and 0.5 V, and at an invariable temperature of 45oC. The mass concentration of Si3N4ceramic particles varied between 7 and 13 g L− 1. The corrosion rate (CR) of the coatings was examined through the potentiodynamic polarization method in 0.5 M of sulphuric acid solution, while the coatings’ microstructure was studied using XRD and SEM. The wear volume (WV) and coefficient of friction (COF) of coated samples and an uncoated sample were investigated using a pin-on-disc tribometer. The samples’ electrical conductivity was studied using simple ammeter-voltmeter equipment. The potentiodynamic polarization test results signified that the thin films reduced the CR of mild steel from 12.3450 mm year− 1to 2.6793 mm year− 1, indicating noteworthy passivation of the films. The refined morphology of the coated surfaces as revealed by the SEM micrographs was ascribed to the dissolution and dispersion of nanoparticles. The XRD crystallographic phases of the coated samples also showed that the thin films possessed excellent texture, high stability and chemical homogeneity, and. More so, the coated mild steel samples exhibited lower COF relative to the uncoated sample. The thin film reduced the WV of the mild steel from 0.00508 mm3to 0.00266 mm3, which indicated that strengthening mechanisms existed between the steel and the coating interface. The electrical conductivity test further shows that the Zn-Si3N4film reduced the electrical conductivity of mild steel from12.97 Ω−1cm−1to 0.64 Ω−1cm−1.

Citer ce document

Akande, I., Oluwole, O., Fayomi, O. (2022). Characteristics Study of Mild Steel Electro-plated with Light Weight Zn-Si3N4 Nanocomposite. https://doi.org/10.21203/rs.3.rs-1950409/v1

Accès au document

Voir sur le dépôt source

Ce document est hébergé sur son dépôt institutionnel d'origine.

Statistiques

Consultations : 1

Téléchargements : 0