Hot workability behaviour of two P92 creep resistant steels: Constitutive analysis

Résumé

Abstract This article reports the flow stress behaviour of two P92 steels at a temperature range of 850–1000°C and a strain rate of 0.1–10 s-1 using the Gleeble® 3500 thermomechanical simulator. A physically-based constitutive model was used to analyse the effects of deformation conditions on the flow stress behaviour during deformation. This model incorporates the influence in the variation of Young’s modulus and the self-diffusion coefficient as affected by temperature. The study developed constitutive equations that predict the flow stress behaviour of the two steels investigated. From the constitutive analysis of the results, the stress exponent n was: 9.8 (steel A) and 10.3 (steel B). The model used the self-diffusion activation energy of steel. The statistical parameters: correlation coefficient of 0.99 (for steel A and B), the absolute average relative error of 2.19% (steel A) and 2.20% (steel B) quantified the applicability of the model. The quantification results show that the constitutive equations developed have high accuracy in predicting the workability of the two P92 steels. The study has shown that this method is applicable in predicting the metal flow pattern of two P92 steels in the metalworking processes.

Citer ce document

Accès au document

Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter

Auteur(s)

Statistiques

Consultations : 1

Téléchargements : 0