Field assessment of surge and continuous furrow irrigation methods in relation to tillage systems

Résumé

Abstract Surge flow irrigation is one of the irrigation techniques for controlling furrow irrigation. The aim of this study was to investigate the effect of surge furrow irrigation on water management compared with continuous irrigation for different tillage systems. An experimental field was treated with various tillage systems (mouldboard plough, chisel plough and rotary plough) and water irrigation application methods (continuous flow, control) in which irrigation water was applied continuously, and surge flow (3-surges, 4-surges and 5-surges) in which irrigation water was applied intermittently until it reached the tail end of the furrow. The results showed that water savings obtained using the surge technique were 18.58, 11.84 and 18.93% lower water use than with continuous flow, for the mouldboard, chisel and rotary ploughs, respectively. The 3-surges treatment with the rotary plough reduced the advance time by 25.36% from that for continuous irrigation. The 4-surges treatment with the mouldboard plough had the highest water application efficiency (88.13%). The 3-surges treatment with the rotary plough had the highest distribution uniformity (85.01%). The rotary plough did not cause as much soil aeration around the root system as the other tillage systems. The field research provided information about surge flow, aimed at reducing advance times and increasing irrigation efficiency.

Citer ce document

Accès au document

Ce document est hébergé sur son dépôt institutionnel d'origine.

Auteur(s)

Statistiques

Consultations : 3

Téléchargements : 0