Accès ouvert

Adsorptive removal of Cr(VI) ions using nitrogen-doping activated carbon: influence of pH, kinetics, isotherm models, optimization, and efficiency evaluation

Article scientifique 2026 Anglais

Résumé

Abstract Hexavalent chromium ion [Cr(VI)] poses serious environmental risks due to its high toxicity and ability to cross biological membranes, leading to organ damage and genetic mutations. This study presents a new practical method for removing Cr(VI) ions from wastewater using nitrogen-doped activated carbon (AC600) prepared by pyrolyzing sawdust with ZnCl 2 at 600 °C. Thereafter, batch experiments were conducted using different adsorbent doses (0.5–2.5 g L –1 ) and Cr(VI) ion concentrations (100–400 mg/L) at pH ranging from 1 to 12. Results revealed that Cr(VI) ions sorption on AC600 followed both linear and adsorption isotherm models at low sorbent doses (< 1.5 g/L). At higher doses, sorption shifted toward a hyperbolic adsorption pattern. Overall sorption data fitted well with both the Freundlich and Temkin isotherm models. Cr(VI) ions removal efficiency increased with contact time, following a sharp rise within the first 20–40 min of contact, while equilibrating within approximately 60–80 min. However, this efficiency decreased as pH increased. The highest efficiency (95–99%) was achieved using 2.5 g of AC600 to treat 1 L of water containing 100–150 mg/L of Cr(VI) ions within 2 h. For higher Cr(VI) ion concentration (200–250 mg/L), the efficiency decreased to 88–90%. The kinetics of Cr(VI) ion sorption on activated carbon followed the Pseudo-Second-Order model at low to moderate AC600 doses and low Cr(VI) ion concentrations. At higher doses and Cr(VI) levels, the power function and intraparticle diffusion models provided better fits. A maximum adsorption % could be achieved by using 2.5 g of AC600 and a Cr(VI) ion solution at 100 mg/L, according to results from an optimization of adsorption parameters using response surface methodology (RSM).

Citer ce document

Nemr, M., Jahin, H., Abbas, M., Hassaan, M., Ismail, M., Nemr, A. (2026). Adsorptive removal of Cr(VI) ions using nitrogen-doping activated carbon: influence of pH, kinetics, isotherm models, optimization, and efficiency evaluation. https://doi.org/10.1038/s41598-026-53699-7

Accès au document

Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter

Voir l'article sur le site de la revue

Statistiques

Consultations : 1

Téléchargements : 0