Enhancement of Waste Foundry Sand Mechanical Properties Through Stabilization Using Slag Based Geopolymer Binder

Résumé

Abstract It is of paramount importance to minimize carbon emission generated from production of major building and construction materials used worldwide such as bricks and Ordinary Portland cement to achieve sustainability requirements. In this paper, the binding properties of the synthesized granulated blast furnace slag (GBFS) geopolymers were assessed by developing eco-friendly waste foundry sand bricks. Four different mix designs were prepared by blending GBFS based geopolymer binder with aggregates (waste foundry sand and crushed stones). The amount of GBFS geopolymer binder was varied from 0 to 40 %. The developed specimens were evaluated for mechanical properties, durability, structural performance, and environmental impact. The specimens synthesised with 40 % GBFS geopolymer binder at a L/ S ratio of 15 % and cured at 80 ℃ achieved the highest UCS of 12 MPa. The results showed that the developed specimens are acid resistant which suggest that they can be used in corrosive environments and do not pose any threat of environmental pollution for long-term use. In conclusion, GBFS-based geopolymers can be used as binders to fabricate building bricks that meet the minimum requirement of ASTM C62-10 that can be used in negligible weathering conditions.

Citer ce document

Accès au document

Ce document est hébergé sur son dépôt institutionnel d'origine.

Auteur(s)

Statistiques

Consultations : 1

Téléchargements : 0