A monopole antenna with cotton fabric material for wearable applications
Résumé
A monopole antenna operated at 2.45 GHz and embedded with artificial magnetic conductor (AMC) for wearable communication systems is investigated in this article. The proposed antenna is composed of a metalized loop radiator with a coplanar waveguide microstrip feedline which is affixed on a cotton fabric material substrate. As well, a cotton-based AMC surface is utilized to eliminate the body's absorbed radiation and enhance the gain of the antenna. It is composed of 5 × 5 array unit cells etched with I-shaped slots. Using this configuration, simulations show that the specific absorption rate (SAR) level was significantly reduced. Considering flat and rounded body parts, it was found that the SAR values averaged over 10 g at a distance of 1 mm away from the tissues model were only 0.18 W/kg and 0.371 W/kg, respectively. Additionally, the antenna gain was improved up to 7.2 dBi with an average radiation efficiency of 72%. Detailed analysis with experimental measurements of the cotton-based antenna for different operation scenarios is introduced. The measured data show a good correlation with the electromagnetic simulation results.
Citer ce document
Accès au document
Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter
Voir l'article sur le site de la revueStatistiques
Consultations : 1
Téléchargements : 0