Self-assembled rectorite films with remarkable mechanical performance: preparation, structural characterization, and properties

Résumé

Abstract Cohesive flexible rectorite clay films with good mechanical performance were prepared by a simple casting method through the self-assembly of exfoliated natural clay from aqueous dispersions. The multi-layered microstructure of the films consisted of continuous layers of aligned clay platelets parallel to the casting surface. Layers overlap randomly in the lateral direction (plane) and join vertically in an irregular manner by edge-to-face cross-linkages (bridging) to form coherent multi-layered nanostructured films with platelet-void microstructure. The films with the highest mechanical properties had thicknesses below 30 µm. Overall films from rectorite clay with monovalent interlayer content exhibited a higher experimental tensile strength ranging up to 44 MPa and Young’s modulus up to 56 GPa. The corresponding experimental values for films with divalent interlayer cations were 23 MPa for strength and 25 GPa for modulus. The highest experimental values for strength and modulus for neat Na–Ca–rectorite films were 25 MPa and 50 GPa respectively. These two mechanical property values of the best rectorite-based clay films compare favorably with values featured by polymer films typically used for packaging applications.

Citer ce document

Accès au document

Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter

Auteur(s)

Statistiques

Consultations : 1

Téléchargements : 0