Cuminum cyminum as green corrosion inhibitor for API 5 L X70 carbon steel in 0.5 M H2SO4 solution

Résumé

Abstract Cuminum cyminum extract (CCE) has been studied as a corrosion inhibitor in controlling corrosion of C-steel corrosion in 0.5 M H2SO4, by weight loss (WL), potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), energy-dispersive X-ray spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) measurements. The findings demonstrated that inhibition efficiency (% IE) enhanced with increasing extract dosages, attaining 83.49% at 200 ppm and finishing at 91.83% at 400 ppm. However, inhibition efficiency was reduced by raising the temperature, decreasing from 91.83% at 298 K to 78.63% at 318 K (all at 400 ppm). CCE adhered to the C-steel surface by the Langmuir adsorption isotherm. EIS measurements exhibited increased transfer resistance (Rct) as the extract dose increased. Polarization curves showed that CCE functions as a mixed-type inhibitor. Several thermodynamic parameters were computed and examined. The free energy of adsorption for the extract under study was calculated and was found 34.7–35.8 kJ mol− 1. Chemical and electrochemical approaches yielded reliable and agreeable results.

Citer ce document

Accès au document

Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter

Auteur(s)

Statistiques

Consultations : 1

Téléchargements : 0