Investigating the flexural performance of reinforced concrete beams using eco-friendly geotextile and wire mesh reinforcements

Résumé

This paper presents an experimental investigation on the flexural performance of reinforced concrete (RC) beams strengthened with eco-friendly materials, specifically steel wire mesh and geotextiles, in conjunction with carbon nanotubes (CNTs). Two strengthening techniques were investigated: (1) internal strengthening by embedding geotextile or steel wire mesh along the longitudinal reinforcement; (2) external strengthening by U-wrapping geotextile or steel wire mesh on the beam surface. Additionally, CNTs were incorporated into the concrete matrix as a third strengthening mechanism. Seven small-scale RC beams (600 × 150 × 150 mm) were tested under one-point bending. The findings demonstrate that all strengthened RC beams exhibited enhanced load-carrying capacity (up to 45% increase), ductility (up to 184% increase), and total energy absorption compared to un-strengthened specimens. Internal wire mesh (WF1) achieved the highest ultimate load (56.2 kN). External geotextile (PGF2) exhibited exceptional deformation capacity (32.7 mm deflection, 1376.9 kN·mm toughness). CNT-modified concrete demonstrated pseudo-ductile behavior with distributed micro-cracking and 666.3 kN·mm total toughness.

Citer ce document

Accès au document

Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter

Auteur(s)

Statistiques

Consultations : 1

Téléchargements : 0