Sorption of chromium from aqueous solutions using Fucus vesiculosus algae biosorbent
Résumé
The presence of heavy metals in wastewater is an environmental concern and the current treatment procedures are very expensive so it is necessary to find effective and inexpensive biosorbents. In this study, Fucus vesiculosus was used as a biosorbent for the biosorption of Cr(III) ions from the aqueous solutions. Biosorption parameters, such as pH, adsorbent dose, contact time, and initial concentrations of Cr(III) had the most impact on the sorption process. The required pH value for sorption was 5, the biosorbent dose was 4.0 g/L, the contact time was seen to occur after 90 min, and the Cr(III) removal decreased from 98.9 to 92%. The maximum biosorption capacity of chromium was 14.12 mg/g. FTIR analysis of Fucus vesiculosus biomass before the sorption process contains carboxyl, amino, hydroxyl, alkyne, and carbonyl groups, and according to the analysis after the sorption process, it was found that Cr(III) metal ions were incorporated within the sorbent during the interaction with (=C-H) active functional groups. The biosorption data were found to be perfectly suited by Langmuir equilibrium isotherm model. According to the results of this study, Fucus vesiculosus is an effective biosorbent for the removal of Cr(III) from aqueous solutions.
Citer ce document
Accès au document
Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter
Voir l'article sur le site de la revueAuteur(s)
Statistiques
Consultations : 1
Téléchargements : 0