Accès ouvert

Enhanced Oil Recovery in the Field A123 by Using the Injection of Alkaline, Surfactant and Polymers

Article scientifique 2023 Anglais

Résumé

This paper is based on numerical simulations in order to improve the total oil production of field A123 by using an Alkaline-surfactant and polymer (ASP) injections method.Its main objective is to carry out reservoir simulations job, that will further permit to conclude if producing oil and gas in this field will be profitable or not.To achieve this objective, the Computer Modelling Group software version 2015.10 (CMG 2015 software) is used to carry out the field numerical simulations.Based on the tests run, one injection well is selected and used as a main injector in order to execute the chemical injection schemes in the field.Four different scenarios are studied such as natural flow of oil as the base case (primary oil production), polymer flooding, alkaline-surfactant (AS) flooding and ASP flooding are considering in the injection process and important results from simulator are analyzed and interpreted.Sensitivity analyses are done especially focusing on chemical solution concentration, injection rate and duration of injection time.The results obtained shows the base case simulations shows that, the reservoir produce oil naturally for 26 years for a quantity of 3,749,204.82bbl and 864,412,318 SCF of gas.With the most significant case in the third scenario, the coupled effect of ASP optimize the quantities to 32,364,440.2 bbl for oil and 7,459,728,710 scf of gas produce.Also the oil recovery factor (ORF) is 64.1554% for polymer flooding, 64.2026% for alkali-surfactant and 64.8056% for the combined ASP flooding, respectively.These results have a direct impact on reservoir pressure which changes after the injected fluids are introduced in the reservoir and therefore improve the production rate.Thus, the feasibility of the project of polymer flooding combined to AS flooding, is up to 873,484,102 USD for the field A123.

Citer ce document

Rengou, M., Chéagé, C., Tapsia, K., Samuel, M., Bachirou, M., Mambou, N. (2023). Enhanced Oil Recovery in the Field A123 by Using the Injection of Alkaline, Surfactant and Polymers. https://doi.org/10.36959/801/225

Accès au document

Voir sur le dépôt source

Ce document est hébergé sur son dépôt institutionnel d'origine.

Statistiques

Consultations : 1

Téléchargements : 0