Statistical analysis of the impact of FeO3 and ZnO nanoparticles on the physicochemical and dielectric performance of monoester-based nanofluids

Résumé

Abstract This article deals with a comparative study of the physicochemical and electrical properties of monoesters of castor oil compared with their counterparts based on FeO3 and ZnO nanoparticles. The results are also compared with those in the literature on triesters, and also with the recommendations of the IEEE C 57.14 standard. The data is analysed statistically using a goodness-of-fit test. The analysis of the viscosity data at 40 °C shows an increase in viscosity. For concentrations of 0.10 wt%, 0.15 wt% and 0.20 wt% these are respectively 5.4%, 9.69%, 12.9% for FeO3 NFs and 7.6%, 9.91% and 12.7% for ZnO NFs. For the same concentrations, the increase in acid number is respectively 3.2%, 2.9%, 2.5% for FeO3 samples and 3.18%, 2.0%, 1.2% for ZnO samples. For the same concentrations, the fire point shows an increment of 4%, 3% and 2% for FeO3 samples and a regression of 8.75%, 6.88% and 5.63% for ZnO samples. As for the breakdown voltage, for the same concentrations we observe respectively an increment of 43%, 27%, 34% for the FeO3. The results show an improvement on partial discharge inception voltage with FeO3 of 24%, 8.13% and 15.21% respectively for the concentrations 0.10 wt%, 0.15 wt% and 0.20 wt%.

Citer ce document

Accès au document

Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter

Auteur(s)

Statistiques

Consultations : 1

Téléchargements : 0