Accès ouvert

Recycling Agriculture Waste for Liquid Deposition 3D Printing

Article scientifique 2024 Anglais

Résumé

Abstract 3D printing is a promising technology for recycling agricultural waste by Liquid Deposition Modeling (LDM). In this paper, we propose a novel method for recycling agricultural waste to be used in Liquid Deposition 3D printing. The method involves converting agricultural waste into suitable powder by grinding and sieving procedures. Then, a paste is prepared based on the powder from agricultural waste, which is then subjected to mechanical and physical testing to study its properties. A 3D printing setup is used to print samples for applying mechanical testing to study the properties of 3D printed agricultural waste. The results of the mechanical and physical testing showed that the agricultural waste paste has promising properties for 3D printing. The paste is strong and durable, and it can be used to print a variety of different products. The results of this research paper demonstrate the potential of 3D printing to recycle agricultural waste and create new products.

Citer ce document

Karsoun, A., Tolba, M., Aziz, A., Hassanin, A., Wahby, A., Klingner, A., Tolba, K. (2024). Recycling Agriculture Waste for Liquid Deposition 3D Printing. https://doi.org/10.21203/rs.3.rs-4020880/v1

Accès au document

Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter

Voir l'article sur le site de la revue

Auteur(s)

Ahmed Karsoun Meryem Tolba Ahmed Abd El Aziz Abdallah M. Hassanin Ahmed Wahby Anke Klingner Khaled Tolba

Statistiques

Consultations : 1

Téléchargements : 0