An in vitro evaluation of tensile strength of molar endocrown milled from various computer aided design and manufacturing materials
Résumé
New computer-aided design and computer-aided manufacturing (CAD-CAM) materials have been reported to have suitable mechanical and physical properties for endocrown restorations. However, there is a lack of literature on evaluating the retention of endocrown using these materials. This in vitro study aimed to compare the retention of endocrowns fabricated from 3 different CAD-CAM materials. Sixty human mandibular third molars were divided into 3 groups (n = 20) according to the material used: (e.max CAD, Ivoclar AG, Schaan, Liechtenstein), (HC, Shofu, Koyoto, Japan), and (Brilliant Crios, Coltene, Altstätten, Switzerland) (n = 20). Specimens were stored in distilled water at 37 °C for 1 week and subjected to 5000 thermal cycles. A universal testing machine (5500R/1123, Instron, Norwood, USA) was used to measure the tensile force. All results were statistically analyzed using one-way ANOVA (α = 0.05), and different failure modes were demonstrated. The results revealed that e. max CAD showed the highest mean tensile force value (402.35 ± 15.812) N, and the lowest mean tensile force value was for Brilliant Coris (118.90 ± 12.430) N (P < .001). It is concluded that e.max CAD endocrowns showed the highest tensile force values after thermocycling in comparison to other materials with a significant difference, which may have a promising impact on the survival of endocrown restorations.
Citer ce document
Accès au document
Texte intégral en lecture en ligne, réservé aux abonnés SPHAERO et aux membres de l'institution. Se connecter
Voir l'article sur le site de la revueAuteur(s)
Statistiques
Consultations : 1
Téléchargements : 0